This drag is best suited for fox, raccoon and other smaller game. This grapple drag is a great addition to your trap line. Fox drag grapple shown on right. We recommend using 6 to 8 feet of chain or 7x7x1/8" stranded cable to attach this fox drag to your trap.

All drowner cables come with 1/8-inch cable, adjustable loop ends and a drowner lock with a J-Hook to attach to trap chain. Available in 3 lengths.

Best suited for coyote and bobcat. This grapple drag is a great addition to your trap line when staking is not an option. Coyote grapple shown on left. We recommend adding six to ten feet of chain or 1/8" 7x7 stranded cable to this coyote drag.

The first truly disposable earth anchor system available. Economical, easy and lightweight. Compare our earth anchor systems to other manufacturers. Easy to use. Drive in earth anchor with a 3/8" pointed stake, then pull on cable to lock into place. Select from 3 styles. Stake ends only, no cable attached. Pictured left to right: standard, heavy duty, soft ground.

These anchors have a large surface area and were designed by Clint Locklear to be tough enough to be used in all soil conditions, including frozen ground. Once set, this anchor stays put. Anchor ends only. 12 count.

Quickly and easily drives the bullet point Fox Hollow Super Stakes. 9/16" cold-roll steel driver with turned down end. These drivers will mushroom with use and require grinding to resurface but using any harder steel, without heat treating, you risk chipping or splintering and injury to your eyes or face. This driver works with the Original and Finned Super Stake Ends.

The first truly disposable earth anchor system available. Economical, easy and lightweight. Compare our earth anchor systems to other manufacturers. Easy to use. Drive in earth anchor with a 3/8" pointed stake, then pull on cable to lock into place. These stakes come with 15 inches of cable attached - ready to use. Select from standard or heavy duty ends. 1 Dozen .

A lightweight anchor system. Stake ends are bullet point, one-piece cast steel. Sold by the dozen. Ends only, no cable attached.

18" x 3/8" Rebar Stakes For Sale, heavy duty with welded tops. 1 dozen bundle. Washer placement may vary from end of stake to 1/2" from end of stake. Designed to work with single flat stake swivel or double stake swivel including the Sleepy Creek 360 swivel. Can also be used for tent stakes or grade stakes when pouring concrete.

These anchors have a large surface area and were designed by Clint Locklear to be tough enough to be used in all soil conditions, including frozen ground. Once set, this anchor stays put. The loop on the end next to the trap is made large enough for the stake to fit through. The length including the end is approximately 15". Sold by the dozen.

Choose from driver end, or complete driver. The driver end can be welded to existing rebar stake or cold rolled steel rod, while complete driver is ready to use. Made especially for Wolf Fang Anchors.

Quickly and easily drives the bullet point Fox Hollow Super Stakes. 9/16" cold-roll steel driver with turned down end and T-handle. This driver will works for the Original and Finned Super Stake Ends.

The Sod Buster Is a digging tool and a stake driver all in one. The 3 pound hammer also has a blade for digging . Works great for trap bed preparation as well as handy tool around the farm where you may need to dig a small ditch or drive stakes or nails. AK, HI and Canada email for shipping quote.

Three-in-one tool - Trowel, hammer and hoe. Approximately 20" long and 3 pounds.

This heavy duty 3-pound digger is a stake driver and more. Fiberglass handle. Modified in West Virginia

Replacement Axe Handle. Fits Snow & Nealley Hudson Bay Axe Heads. May also fit other brands of axe heads. 24" long. Weighs approximately 1.07 pounds.

A lightweight anchor system. Stake ends are bullet point, one-piece cast steel. Sold by the dozen. Each Super Stake comes with 15 inch attached cable - ready to use.

24" Stainless Steel Heavy Duty T-Handled Driver. Drives Heavy Duty Berkshire stakes and without bending the stake point. Stronger than re-bar drivers. Get more uses out of your Berkshire stakes with this driver. Made especially for the heavy duty Berkshire stake but will also drive the standard Berkshire stakes as well.

Quickly and easily drives the bullet point Fox Hollow Super Stakes. This driver is heat treated and the tip will not mushroom when used by the hardest long liner. Works on both Original and Finned Super Stakes. Driver is a hair under 2 feet from tip to tip. This measurement includes the nut on top. Total driver length is 2 feet. This driver works with the Original and Finned Super Stake Ends.

24" x 1/2" Trapping Stakes For Sale, extra heavy duty with extra length. Great for double staking coyotes. 1 dozen bundle. Washer placement may vary from end of stake to 1/2" from end of stake. Can be used for trap stakes, tent stakes or grade stakes.

Fox Hollow Super Stakes with 15” of #2 Select Grade straight link chain attached with a welded shut Mighty Hook. 1 dozen.

Removes rebar stakes as well as disposable stakes.
Hook onto your stake or cable with the two heavy-duty tines and apply downward leverage using the bowed side of the tool. Provides great leverage when pulling stakes.

The Penobscot Bay Kindling Axe from Snow & Neally has a carbon steel axe like the Hudson Bay Axe but with a compact 17" American Hickory handle that makes it ideal for backpacking, camping or just around the home. Anywhere you need to split some wood for a fire. Comes with the 1 3/4 pound Hudson Bay Axe head and leather sheath. Total weight 2 lb. 9 oz. Built to last. Factory new.