A flake-type antifreeze that mixes well with dirt to help prevent freeze-up of sets. 1 pound bag

Made especially for the coil spring trap, but fits the long spring very well too. The 1.75 also fits the #2 round jaw trap. These are packaged in a sealed bag, free of offensive odors. Ready to use. Come 25 covers to a package. Select from sizes #1-1/2, #1.75, #2, #3.

Allows you to pack dirt inside the jaws of trap while bedding.  The bedders support the pan, not allowing the trap to fire.
Size 1 fits #1-1/2 & #1-3/4 coilsprings thru #3 longspring; Size 2 fits #2 & #3 coilsprings & #4 longspring; Size #3 fits BMI coilsprings.

Though originally designed as a bedding tool, the Trapper's Cap also eliminates the need for pan covers 90% of the time. Helps you get sets in faster. Model A fits most #1-1/2 coil springs, Model B fits most #1-3/4 and #2 coil springs, Model C fits #3 coil springs and #3 and #4 long springs.

Great material for cold weather trapping. The hulls will not absorb water, so no need to worry about traps freezing. May contain small amounts of buckwheat grain pieces or flour. These are mill run hulls. 5 pound bag.

This metal dirt sifter is very well made. Works exceptionally well for keeping large stones, sticks, etc., from getting over trap. Can be dyed along with your traps. 10" x 8" x 2-1/4" with 1/4" wire screen floor. New galvanized model.

Will prevent trap from firing while packing dirt inside of jaws. The Capper is made of cast aluminum and has a very close tolerance leaving a narrow gap between pan and dirt. Weighs just 12 oz. Tougher, more durable than plastic. Available in 5 sizes.

A heavy duty sifter made of stainless steel. Built to last a lifetime. This is the sifter used by professional trapper Rusty Johnson. This sifter can also be used when sifting dirt to find artifacts like arrow heads, civil war relics or coins.Measures 9.5" by 8.75". The holes are round and measure 1/4 inch.

The Sod Buster Is a digging tool and a stake driver all in one. The 3 pound hammer also has a blade for digging . Works great for trap bed preparation as well as handy tool around the farm where you may need to dig a small ditch or drive stakes or nails. AK, HI and Canada email for shipping quote.

Three-in-one tool - Trowel, hammer and hoe. Approximately 20" long and 3 pounds.

The Aluminum Trappers Cap designed to help firmly bed MB traps. When properly used, the Trapper’s Cap will eliminate the use of pan covers 90% of the time. Will prevent accidental firing while dirt is being packed inside the jaws. Available in 2 sizes.

Replacement Axe Handle. Fits Snow & Nealley Hudson Bay Axe Heads. May also fit other brands of axe heads. 24" long. Weighs approximately 1.07 pounds.

Buckwheat hulls are an all natural trap bedding material. Will not absorb water so there is less problems with freeze up. Mill run hulls may contain some flour or grain pieces. Approximately 23 pound bag.

Waxed dirt for trapping. This dirt has been treated with wax to make it freeze proof. Antifreeze properties will not absorb water. Keep your traps working longer in inclement weather with waxed dirt from Murray's Lures & Trapping Supplies. Approximately 19 pounds per box.

Great material for cold weather trapping. The hulls will not absorb water, so no need to worry about traps freezing. Can contain some flour or grain pieces as these are mill run hulls. 22 pound bag (22lb).

Heavy duty dirt sifter made by J. C. Conner, available in Aluminum or Stainless with easy grip handle.  Sifter is 6 1/2" in diameter and 6" deep at the handle with heavy duty expanded metal bottom, welded inside and out , which makes one strong sifter.

All aluminum heavy wall dirt sifter with handle for easy gripping.  7" x 10" opening with tapered sides  and a slide in floor for the convenience of carrying dirt.  Made in the USA by J. C. Conner.

This Bucket Sifter is designed to sit inside a five gallon bucket and rest on the handles. Perfect for pre-sifting peat moss or dry dirt for your trapline. It is also very useful for sifting for artifacts . Measures 10 7/8" across and 3 5/16" high. Stainless steel sifter has round 1/4" holes. Made in the USA.